Complete guide to plumbing a house from scratch tips, Property drainage advice, Residential building plumber guide

Complete Guide to Plumbing a House

post updated 10 February 2024

October 19, 2020

By the end of September this year, there were close to 123,3000 new house completions in the United States. When considering fixtures for these houses, plumbing stands out as one of the most critical installations in any new home. Without a properly developed plumbing system, you risk a recurrence of molds, fungus, and leakages. So in order to avoid this contact George Plumbing, Heating & Air Conditioning

Ensuring professionalism in the process of plumbing can solve a myriad of issues in the future. For new home constructions, the entire process of setting up your plumbing installations from the initial stages should be systematic. When tackling a project as complex as plumbing a house from scratch, it’s essential to have access to expert advice and quality materials. Reaching out to a renowned plumbers merchant in London, like Tucker French, can make all the difference in ensuring your project’s success. Do you want to install plumbing fixtures and are wondering where to start? You can get your hydraulic pumps and water pumps in Saudia Arabia from Ejawda.

Here we break down the process of plumbing installation from scratch for you.

The Complete Guide to Plumbing a House From Scratch

Have an Installation Timetable

It might be possible to get confused or miss the mark if you commence the process of installation without a timetable. Before anything else, have a guide that will help you install all the fixtures in phases. You’ll also be at ease knowing that you can tick your to-do list on the go.

A timetable also helps you know what to accomplish first and what to do last when installing the fixtures. Even the most seasoned professionals consider working with a timetable the best way to install plumbing. Check out frisco tx plumbers.

Where Does the Plumbing System Start?

When setting up your plumbing system from scratch, it’s essential to know where the system starts. The first point of connection between your plumbing system and the municipal water sewerage system should be the sewer accommodation stubs.

This is where your plumbing system starts. The accommodation stubs must be in place before the laying of the foundation. Once you establish where to set the sewer accommodation stubs, you can then proceed with the installation process.

Rough-in Plumbing Phase

Once the accommodation stubs are in place, your next step should be to install the rough-ins for your plumbing. The rough-in phase involves setting in the primary lines. The lines should be set without fixing in the final connections. You should ensure that you do this before hanging the drywall.

You should also ensure that the main drains are all set in-line with the stack. The stack refers to the vertical drain pipe that all other drain pipes will eventually drain into to complete the plumbing system.

It would also make sense to install the rough-in drains for the sinks and the bathtubs at this point. Once you do this, you’ll be sure that you have all the water supply pipes and toilet flanges in place.

Fixing Large Fixtures

Fixtures are an essential part of the plumbing system. If you install plumbing fixtures without paying attention to the specific house dynamics, you might end up mis-fixing your fixtures. As such, you can’t afford to wait until you set the doorways and walls for you to install these fixtures.

Ensure that you set any fixture that’s larger than a sink before framing the walls. This will help you avoid the need to resize the fixtures in case they don’t fit. It will help to call in an expert at this point if you aren’t sure of the actual measurements.

Time to Connect the Fixtures

The process of installing plumbing fixtures is all about timing. It would be best if you got the timing right to ensure that the connections function well. Fixtures such as sinks and toilets are long-lasting, which means that you can proceed to complete their connection with permanency once the fixtures are in place.

You can therefore proceed to connect the fixtures to the supply and the drainage. Once the system’s connection is complete, you can proceed to complete the walls and floorings. While there are close to 500,000 plumbers in the United States, dealing with a reliable and trusted contractor is paramount.

Connecting the Water Supply System

Once you are sure that the sinks and toilets systems are in place, you can now commence with the water supply system. Your water supply system ensures that you achieve maximum pressure in your house.

Your pressurized water enters your house through the main lines. You can always use the hydraulic tester to check the pressure in the supply system.

Your water supply must be set below the frost line. The idea is to ensure that your water supply system isn’t susceptible to freezing even during the winter season. Establishing the mainline is rather vital at this stage given that it’s the primary supply.

The mainline enters the house then splits into two other channels.

The central drain then connects to the stack. One of the split lines then directs the water away to the main sewer drains. The line then ties into the municipal sewer system and is then directed into the sewer system.

It’s essential to get the water supply system right to avoid future concerns due to low pressure and clogged lines. If you’re unsure about how to go about this process, you could always consider calling in an expert to help with the process. It’s always best to work with a reliable plumbing company, this trusted plumber in Woking has always been a great company to work with.

Installing the Drainage System

This is the last yet most important phase as you install your plumbing fixtures. The external drainage system consists of the central vent and the soil stack. The two are the first points of contact as the drain water finally heads out of the house.

The stack directs all the water into the municipal sewer system. You could also direct the water into the personal septic tank.

The vent pipes are part of the essential fixtures of the sewer drain. All plumbing vent pipe installations connect to the stack. Such connections are essential, given the need to ensure ventilation through the main stack. If your home lacks an easy connection, you should ensure that the vents exist in the home in separate channels.

Check out the Auckland Plumbing Company.

This Is How to Install Plumbing

The process of installing plumbing in a new house can be hectic if you don’t have the right information. If you want to install plumbing without experiencing hurdles, it will help to have a plumbing installation timetable.

You should then start with what’s the main priority and end by connecting the drainage system out of the house. Understanding each phase and ensuring you follow the systematic process of installation is imperative. This guide offers you the basics of plumbing installation from start to finish.

Was this article helpful? We are here to offer you much more information on events, architecture, products, and tours. Read on for more.

Comments on this Complete guide to plumbing a house from scratch advice article are welcome.