How to seal a shower enclosure guide, Property waterproofi bathroom screen tips, Online home insulation sealing advice

How to seal a shower enclosure?

9 Dec 2021

Learn about sealing a shower screen!

In any bathroom, the shower enclosure should be kept immaculately clean and feature a tight seal. Otherwise, the bathroom floor will be permanently wet, leaking water will cause ugly stains, and mold may begin to appear on the walls. So it’s a good idea to arm yourself with some basic knowledge about shower enclosure sealing – any handyman can do it himself! Sometimes it’s not the seal though and you’ll need more complicated work done. In this case you should consider hiring a professional shower screen repair company like Shower Ranger.

How to seal a shower enclosure – insulation types and how to use them

In order to keep your shower enclosure airtight, it’s essential to use special insulation to prevent uncontrolled leaks and rising damp. Below are some of the best and most commonly used solutions.

Liquid insulation film is the key sealant here. Before you lay tiles, you cover the walls and floor with the film. This way, we protect them from the damaging effects of water that enters the gaps between the tiles, doing serious damage.

Insulation tape is mainly used in places where we have a bathroom faucet and shower. When taping, we need to press the tape well so that it creates a tight fit.

We install the corners and insulation strips mainly under the wall with the shower, but also in places where the wall meets the floor. The installation consists mostly of pressing the insulation elements into the silicone layer.

Fungicidal properties are a very important component of the sealants. We should keep this in mind when making a purchase, because a sealant with such properties will protect us from later replacement of a moldy silicone strip.

Sanitary silicone is the best friend of any shower enclosure. It tightly plugs all gaps minimizing the chances of water flooding the bathroom. In addition, it has fungicidal properties and protects against the formation and spreading of moisture.

The products are available in a set with the purchase of the cab, but you can also buy them on your own. The purchase in a set is so much better that you will get all the necessary elements at the same time.

The process of sealing the cabin

The first step in sealing the cabin is to properly prepare the walls and floor. We start by cleaning the surface and applying a layer of primer, which will properly prime the surface. Next, we use a brush or roller to apply a coat of liquid waterproofing membrane that will ensure water is kept away from our walls and floor. At this point we get the green light to lay ceramic tiles. The further course of the process depends on the type of cabin we decide on.

Sealing the connection between the shower base and the wall

A shower enclosure with a shower tray has one weak point that needs special attention. This is the gap between the wall and the shower tray. It must be sealed very well with materials with a guarantee of durability. Then the water from the shower will not get into the undesirable corners. The seal should be flexible enough not to crack when using the shower.

According to Local Technician the best choice here is sanitary silicone, which is resistant to oxidation and the damaging effects of fungi. Freshly applied silicone should be moistened with lukewarm water mixed with soap or washing-up liquid. Then you will have the opportunity to profile the applied grout. Silicone grout should be replaced once every few years.

In cabins without a shower tray, the insulation is mainly focused on the floor and the drainage system. The use of liquid foil here is identical to that in shower enclosures with a shower tray. When sealing the linear drainage elements we should focus on the joints, where the probability of leakage is the highest. Many systems also have their own protective elements. These are specific flanges, which make the sealed joints even more secure.

Sealing the cabin wall-to-wall joint

The next step is sealing the joint between the shower enclosure wall and our wall. This is a process that requires great precision. The best way is to coat both the wall and the part of the shower wall that is to adhere to the wall with a layer of silicone before installation. This will bond the two layers of silicone together and is most likely to avoid leaks.

It is not worth installing the cabin first. Injecting silicone into the created gap will be a strenuous task, moreover there is a high probability that you will dirty the tiles on the wall and the cabin wall in the place of joining. The cleaning of such dirt is by no means a quick and pleasant task.

Sealing it yourself is not difficult

The installation and subsequent sealing of the shower tray and shower enclosure should not be a problem for the average DIY enthusiast. Of course you can hire a professional for this job, but with the right knowledge, you can easily avoid this unnecessary expense.

Comments on this How to seal a shower enclosure guide – sealing a shower screen advice article are welcome.